PHOTECELL OPERATED BASIN TAP Built in photocell operated wash basin tap. The tap is supply with the anti vandal system that stop the water in case a vandal block the photocell. The product is very simply to install and simply for the maintenance. The tap is supply with a filter. SPARE PART: ART. 8000AM Electrovalve 3/8 ART. 8000LM Photocell with logic components ART. 8000C Transformer 220/6 Volt ART. 8000D Battery box ART. 8000E Lithium battery 6 volt 1300 mAh ART. 8000G Under basin mixer ART. 8005 Photocell basin tap current operated; the tap is supply with all necessary for a correct installation: • built in box with solenoid valve and filter • stainless plate 230x180 with photocell and logic components • spout • trasformer 220/6 Volt ART. 8005 BATTERY Photocell basin tap battery operated; the tap is supply with all necessary for a correct installation: • built in box with solenoid valve and filter • stainless plate 230x180 with photocell and logic components • spout • battery box • battery lithium 6 volt 1300 mAh ART. 8006 Photocell basin tap current operated with under basin mixer; the tap is supply with all necessary for a correct installation: • built in box with solenoid valve and filter • stainless plate 230x180 with photocell and logic component • spout • trasformer 220/6 Volt • under basin mixer ART. 8006 BATTERY Photocell basin tap battery operated with under basin mixer;the tap is supply with all necessary for a correct installation: • built in box with solenoid valve and filter • stainless plate 230x180 with photocell and logic component • spout • battery box • battery lithium 6 volt 1300 mAh TECHNICAL INFORMATION: Transformer (only A/C model) 220/6 volt Lithium battery (only battery model) 6 Volt 1300 mAh Working pressure 0,2/10 Bar Angle of sensor 8° Working temperature da 0° a 50° C Immunity to the light 10.000 lux Reply timing 500 ms Security timing 50 sec. (ca. 20%) Battery duration 2 years o 100.000 cycle << BACK GO ON >>